The Kinesis connector provides access to Amazon AWS Kinesis Streams.
To use the connector, add the following Maven dependency to your project:
flink-connector-kinesis_2.11 has a dependency on code licensed under the Amazon Software License (ASL).
Linking to the flink-connector-kinesis will include ASL licensed code into your application.
flink-connector-kinesis_2.11 artifact is not deployed to Maven central as part of
Flink releases because of the licensing issue. Therefore, you need to build the connector yourself from the source.
Download the Flink source or check it out from the git repository. Then, use the following Maven command to build the module:
Attention For Flink versions 1.4.2 and below, the KPL client version
used by default in the Kinesis connectors, KPL 0.12.5, is no longer supported by AWS Kinesis Streams
This means that when building the Kinesis connector, you will need to specify a higher version KPL client (above 0.12.6)
in order for the Flink Kinesis Producer to work. You can do this by speciyfing the preferred version via the
aws.kinesis-kpl.version property, like so:
The streaming connectors are not part of the binary distribution. See how to link with them for cluster execution here.
Follow the instructions from the Amazon Kinesis Streams Developer Guide to setup Kinesis streams. Make sure to create the appropriate IAM policy and user to read / write to the Kinesis streams.
FlinkKinesisConsumer is an exactly-once parallel streaming data source that subscribes to multiple AWS Kinesis
streams within the same AWS service region, and can transparently handle resharding of streams while the job is running. Each subtask of the consumer is
responsible for fetching data records from multiple Kinesis shards. The number of shards fetched by each subtask will
change as shards are closed and created by Kinesis.
Before consuming data from Kinesis streams, make sure that all streams are created with the status “ACTIVE” in the AWS dashboard.
The above is a simple example of using the consumer. Configuration for the consumer is supplied with a
instance, the configuration keys for which can be found in
ConsumerConfigConstants. The example
demonstrates consuming a single Kinesis stream in the AWS region “us-east-1”. The AWS credentials are supplied using the basic method in which
the AWS access key ID and secret access key are directly supplied in the configuration (other options are setting
AUTO). Also, data is being consumed
from the newest position in the Kinesis stream (the other option will be setting
TRIM_HORIZON, which lets the consumer start reading the Kinesis stream from the earliest record possible).
Other optional configuration keys for the consumer can be found in
Note that the configured parallelism of the Flink Kinesis Consumer source can be completely independent of the total number of shards in the Kinesis streams. When the number of shards is larger than the parallelism of the consumer, then each consumer subtask can subscribe to multiple shards; otherwise if the number of shards is smaller than the parallelism of the consumer, then some consumer subtasks will simply be idle and wait until it gets assigned new shards (i.e., when the streams are resharded to increase the number of shards for higher provisioned Kinesis service throughput).
Also note that the assignment of shards to subtasks may not be optimal when
shard IDs are not consecutive (as result of dynamic re-sharding in Kinesis).
For cases where skew in the assignment leads to significant imbalanced consumption,
a custom implementation of
KinesisShardAssigner can be set on the consumer.
The Flink Kinesis Consumer currently provides the following options to configure where to start reading Kinesis streams, simply by setting
one of the following values in the provided configuration properties (the naming of the options identically follows the namings used by the AWS Kinesis Streams service):
LATEST: read all shards of all streams starting from the latest record.
TRIM_HORIZON: read all shards of all streams starting from the earliest record possible (data may be trimmed by Kinesis depending on the retention settings).
AT_TIMESTAMP: read all shards of all streams starting from a specified timestamp. The timestamp must also be specified in the configuration properties by providing a value for
ConsumerConfigConstants.STREAM_INITIAL_TIMESTAMP, in one of the following date pattern :
ConsumerConfigConstants.STREAM_TIMESTAMP_DATE_FORMATis not defined then the default pattern will be
yyyy-MM-dd'T'HH:mm:ss.SSSXXX(for example, timestamp value is
2016-04-04and pattern is
yyyy-MM-ddgiven by user or timestamp value is
2016-04-04T19:58:46.480-00:00without given a pattern).
With Flink’s checkpointing enabled, the Flink Kinesis Consumer will consume records from shards in Kinesis streams and periodically checkpoint each shard’s progress. In case of a job failure, Flink will restore the streaming program to the state of the latest complete checkpoint and re-consume the records from Kinesis shards, starting from the progress that was stored in the checkpoint.
The interval of drawing checkpoints therefore defines how much the program may have to go back at most, in case of a failure.
To use fault tolerant Kinesis Consumers, checkpointing of the topology needs to be enabled at the execution environment:
Also note that Flink can only restart the topology if enough processing slots are available to restart the topology. Therefore, if the topology fails due to loss of a TaskManager, there must still be enough slots available afterwards. Flink on YARN supports automatic restart of lost YARN containers.
If streaming topologies choose to use the event time notion for record timestamps, an approximate arrival timestamp will be used by default. This timestamp is attached to records by Kinesis once they were successfully received and stored by streams. Note that this timestamp is typically referred to as a Kinesis server-side timestamp, and there are no guarantees about the accuracy or order correctness (i.e., the timestamps may not always be ascending).
The Flink Kinesis Consumer uses multiple threads for shard discovery and data consumption.
For shard discovery, each parallel consumer subtask will have a single thread that constantly queries Kinesis for shard information even if the subtask initially did not have shards to read from when the consumer was started. In other words, if the consumer is run with a parallelism of 10, there will be a total of 10 threads constantly querying Kinesis regardless of the total amount of shards in the subscribed streams.
For data consumption, a single thread will be created to consume each discovered shard. Threads will terminate when the shard it is responsible of consuming is closed as a result of stream resharding. In other words, there will always be one thread per open shard.
The Flink Kinesis Consumer uses the AWS Java SDK internally to call Kinesis APIs for shard discovery and data consumption. Due to Amazon’s service limits for Kinesis Streams on the APIs, the consumer will be competing with other non-Flink consuming applications that the user may be running. Below is a list of APIs called by the consumer with description of how the consumer uses the API, as well as information on how to deal with any errors or warnings that the Flink Kinesis Consumer may have due to these service limits.
DescribeStream: this is constantly called
by a single thread in each parallel consumer subtask to discover any new shards as a result of stream resharding. By default,
the consumer performs the shard discovery at an interval of 10 seconds, and will retry indefinitely until it gets a result
from Kinesis. If this interferes with other non-Flink consuming applications, users can slow down the consumer of
calling this API by setting a value for
ConsumerConfigConstants.SHARD_DISCOVERY_INTERVAL_MILLIS in the supplied
configuration properties. This sets the discovery interval to a different value. Note that this setting directly impacts
the maximum delay of discovering a new shard and starting to consume it, as shards will not be discovered during the interval.
GetShardIterator: this is called
only once when per shard consuming threads are started, and will retry if Kinesis complains that the transaction limit for the
API has exceeded, up to a default of 3 attempts. Note that since the rate limit for this API is per shard (not per stream),
the consumer itself should not exceed the limit. Usually, if this happens, users can either try to slow down any other
non-Flink consuming applications of calling this API, or modify the retry behaviour of this API call in the consumer by
setting keys prefixed by
ConsumerConfigConstants.SHARD_GETITERATOR_* in the supplied configuration properties.
GetRecords: this is constantly called
by per shard consuming threads to fetch records from Kinesis. When a shard has multiple concurrent consumers (when there
are any other non-Flink consuming applications running), the per shard rate limit may be exceeded. By default, on each call
of this API, the consumer will retry if Kinesis complains that the data size / transaction limit for the API has exceeded,
up to a default of 3 attempts. Users can either try to slow down other non-Flink consuming applications, or adjust the throughput
of the consumer by setting the
ConsumerConfigConstants.SHARD_GETRECORDS_INTERVAL_MILLIS keys in the supplied configuration properties. Setting the former
adjusts the maximum number of records each consuming thread tries to fetch from shards on each call (default is 10,000), while
the latter modifies the sleep interval between each fetch (default is 200). The retry behaviour of the
consumer when calling this API can also be modified by using the other keys prefixed by
FlinkKinesisProducer uses Kinesis Producer Library (KPL) to put data from a Flink stream into a Kinesis stream.
Note that the producer is not participating in Flink’s checkpointing and doesn’t provide exactly-once processing guarantees. Also, the Kinesis producer does not guarantee that records are written in order to the shards (See here and here for more details).
In case of a failure or a resharding, data will be written again to Kinesis, leading to duplicates. This behavior is usually called “at-least-once” semantics.
To put data into a Kinesis stream, make sure the stream is marked as “ACTIVE” in the AWS dashboard.
For the monitoring to work, the user accessing the stream needs access to the CloudWatch service.
The above is a simple example of using the producer. To initialize
FlinkKinesisProducer, users are required to pass in
AWS_SECRET_ACCESS_KEY via a
java.util.Properties instance. Users can also pass in KPL’s configurations as optional parameters to customize the KPL underlying
FlinkKinesisProducer. The full list of KPL configs and explanations can be found here. The example demonstrates producing a single Kinesis stream in the AWS region “us-east-1”.
If users don’t specify any KPL configs and values,
FlinkKinesisProducer will use default config values of KPL, except
RateLimit limits the maximum allowed put rate for a shard, as a percentage of the backend limits. KPL’s default value is 150 but it makes KPL throw
RateLimitExceededException too frequently and breaks Flink sink as a result. Thus
FlinkKinesisProducer overrides KPL’s default value to 100.
Instead of a
SerializationSchema, it also supports a
KinesisSerializationSchema allows to send the data to multiple streams. This is
done using the
KinesisSerializationSchema.getTargetStream(T element) method. Returning
null there will instruct the producer to write the element to the default stream.
Otherwise, the returned stream name is used.
Since Flink 1.4.0,
FlinkKinesisProducer switches its default underlying KPL from a one-thread-per-request mode to a thread-pool mode. KPL in thread-pool mode uses a queue and thread pool to execute requests to Kinesis. This limits the number of threads that KPL’s native process may create, and therefore greatly lowers CPU utilization and improves efficiency. Thus, We highly recommend Flink users use thread-pool model. The default thread pool size is
10. Users can set the pool size in
java.util.Properties instance with key
ThreadPoolSize, as shown in the above example.
Users can still switch back to one-thread-per-request mode by setting a key-value pair of
java.util.Properties, as shown in the code commented out in above example.
It is sometimes desirable to have Flink operate as a consumer or producer against a non-AWS Kinesis endpoint such as Kinesalite; this is especially useful when performing functional testing of a Flink application. The AWS endpoint that would normally be inferred by the AWS region set in the Flink configuration must be overridden via a configuration property.
To override the AWS endpoint, taking the producer for example, set the
AWSConfigConstants.AWS_ENDPOINT property in the
Flink configuration, in addition to the
AWSConfigConstants.AWS_REGION required by Flink. Although the region is
required, it will not be used to determine the AWS endpoint URL.
The following example shows how one might supply the
AWSConfigConstants.AWS_ENDPOINT configuration property: